Product ID:800, HAI-800 ALLOY
MSDS Date:08/21/1989
FSC:9540
NIIN:00N032140
MSDS Number: BPMYQ

HARRISON ALLOYS INC

308 MIDDLESEX ST
HARRISON, NJ 07029
US

Emergency Phone: 201-483-4800

Info Phone: 201-483-4800

Cage: 49076

HARRISON ALLOYS INC

HARRISON, NJ 07029 US

Telephone: 201-483-4800

Cage: 49076

CHROMIUM;(CR) (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 21%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

IRON (III) OXIDE; (FE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 45%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

NICKEL;(NI)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 33%

OSHA PEL 1 MG/M3 DUST

ACGIH TLV: 1 MG/M3 DUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:UNDER NORMAL HANDLING/USE, EXPOS TO
SOLID, MASSIVE FORMS OF ALLOY PRESENTS FEW HLTH HAZ. THEY MAY INCL
SKIN IRRIT/ OTHER ALLERG RXNS IN SENSITIVE INDIV. DUST/WELDING
FUMES/GASES MAY CAUSE: ACUTE:NAUSE A, TIGHTNESS OF CHEST, FEVER,
IRRIT OF EYES, NOSE, THROAT & SKIN; LOSS OF CONSCIOUSNESS DUE TO
WELDING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:GROUP 2B (IARC), ANTICIPATED
CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ:GASES OR LACK OF O2. CHRONIC: ADVERSE
EFTS MAY INCL SKIN SENSIT, NEUROLOGICAL DMG & RESP DISEASES (BRONCH
ASTHMA, LUNG FIBROSIS OR PNEUMOCONIOSIS). RECENT EPIDEMIOLOGICAL
STUDIES OF WORKERS M ELTING & WORKING ALLOYS CNTNG NICKEL-CHROMIUM
HAVE FOUND NO INCR RISK OF CANCER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE FROM EXPOSURE AND GET MD IMMEDIATELY. GIVE OXYGEN
IF UNCONSCIOUS. IF NOT BREATHING, RESUSITATE IMMEDIATELY.
SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD IMMEDIATELY .
EYE:FLUSH W ITH POTABLE WATER FOR A MINUMUM OF 15 MINUTES. CALL MD
. INGEST:NOT APPLICABLE.

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROETECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS NONFLAMMABLE; HOWEVER,
WELDING ARCS AND SPARKS CAN IGNITE FLAMMABLE LIQUIDS AND
COMBUSTIBLE SOLIDS.

Spill Release Procedures:IF MATERIAL IS RELEASED/SPILLED FROM
CUTTING/GRINDING/WELDING, VACUUM RESIDUE INTO SUITABLE CONTAINERS
AND DISPOSE OF IN ACCORDANCE WITH EPA OR LOCAL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MATERIAL IN SOLID FORM DOES NOT
REQUIRE SPECIAL PRECAUTIONS IN HANDLING AND STORING, BUT USE
INDUSTRIAL HYGIENE AIR MONITORING TO ENSURE (SUPP DATA)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF SOLID METAL ALLOYS ARE CONVERTED IN MFG
(INCLUDING GRINDING, HIGH TEMP CUTTING & WELDING) PROCESSES TO
DUSTS, FUMES, GASES OR MISTS, & VENT NOT ADEQ TO MAINTAIN EXPOS
BELOW LIMITS SPECIFIED, THEN R ESP PROT SHOULD BE USED.USE
ONLY(SUPDAT)
Ventilation:IF SOLID METAL ALLOYS ARE CONVERTED TO DUSTS, FUMES/MISTS,
MAINTAIN WORKING ENVIRON BELOW EXPOS LIMITS SPECIFIED(SUPDAT)
Protective Gloves:LEATHER OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHEN CUTTING/GRINDING/WELDING WEAR
GLOVES/FACE PROT/FLAME RETARDANT CLTHG. SELECT WELDING LENS SHADE
FROM AWS PUB. F2.2.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BOILING PT:>4622F, >2550C. HAZ DECOM PRODS: OF THE METALS, CHROMATES,
FLUORIDES & COMPLEX METALLICS. GASES MAY INCLUDE CO, OZONE, & NOX.
HNDLG/STOR PREC:THAT USE OF MATL DOES NOT CREATE EXPOS WHICH EX
CEED LEVELS SPECIFIED. RESP PROT:NIOSH/MSHA APPROVED RESPS I/A/W
29CFR1910.134. VENT:BY USE OF ADEQUATE EXHAUST VENT.

HCC:N1
Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:2552F,1400C
Spec Gravity:7.9 (H2O=1)
Solubility in Water:0
Appearance and Odor:GREY METALLIC SOLID SHAPED AS WIRE, ROD OR STRIP;
ODORSESS.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS. CONTACT WITH MINERAL ACIDS WILL RELEASE HYDROGEN - A VERY
COMBUSTIBLE GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES/GASES FROM WELDING & HIGH TEMP
CUTTING CNTN CONSTITUENTS DIFFERENT FROM INGREDS LISTED & MAY INCL
OXIDES (SUPDAT)

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.